• A Look at Direct Bonding

    The electrical work in Columbus that hides behind your walls can be quite complex when examined with the untrained eye. For this reason, it’s a good idea to have your electrician perform the necessary inspections and decide on the proper solutions. The importance of direct bonding comes into play when you consider the corrugated stainless steel tubing (CSST) that is used for your gas systems. Since direct bonding comes with certain requirements in order to satisfy the needs set by the National Fuel Gas Code, it helps to understand how it works. Feel free to keep reading if you would like to take a look at direct bonding.

    Electrical systems can be very particular, and there may be serious consequences if any minor details are overlooked. This is why it is required that all gas piping utilize standard CSST to make use of direct bonding. Direct bonding will keep electricity continuous and connected to the electrical ground system, making the system safer. Your gas piping must be connected to one of several electronic components. In residential situations, a single bond connection will typically be made. Talk to your electrician to learn more about why direct bonding is so important to electrical service.


  • What Size Generator Do You Need?

    When you suffer a power outage due to warm weather, a summertime storm, or any other event that compromises your electricity, make sure you’re prepared with whole home generators in Dublin. Whether you choose a whole home generator or a portable model, this type of electrical equipment will help you get back up and running when the power goes out. When you start looking for a new generator, you should understand what a given unit’s size has to do with its functionality and efficiency. You should also think about what types of appliances you are most concerned with powering as well as the noise level you can handle from your generator. Read on for help in determining what size generator you need.


    Understanding the Importance of Size

    The size of a generator is directly linked to the capacity it has to provide power. A large generator is one that has a substantial power output, while a small generator will not contribute as much. Whole home generators tend to be on the large side, while portable generators may be smaller and more compact but come with a smaller capacity. If you know how much power you need, you’re one step closer to choosing the right type of generator.

    Determining What You Need to Power

    If you are unsure exactly how much power you will need, think about how you plan to use your home generator. A smaller sized generator could do the trick if you only need to power a few small appliances, but a larger one will be necessary if you are interested in keeping your entire home powered during a blackout. You can always talk to your generator professional if you need help finding out how much power is required for your specific needs.

    Considering the Noise Level

    Depending on where you plan to use your generator and what you hope to use it for, noise may be an issue. You can expect a small portable generator to be relatively quiet, but a large generator could be noisy. This is especially important if you have trouble sleeping.

  • Resetting a Tripped Breaker

    A tripped electrical breaker can come as a surprise, but it might not indicate a serious problem with your home electrical wiring. Your breaker protects overloaded electrical outlets from causing damage to the home and your appliances, and you can often reset a tripped breaker without the help of your electrical contractor . Watch this video to learn how you can reset a tripped breaker without calling an electrician.

    The process of resetting a tripped breaker is typically quite simple, but the procedure depends on your situation. If you have lost power in an entire house, room, or wall, take a look at your electrical box. Find the breaker that isn’t quite fully on and turn it off. Then you can turn it back on and try your appliances again. If you only lose power to one outlet, unplug your appliances and press the reset button that sticks out from the GFCI outlet; then plug your electrical cords back in.

  • The Importance of Grounded Outlets

    New homes tend to feature a different kind of electrical outlet in Columbus: one that is grounded and able to accept three prongs. Grounded outlets can help to make your home electrical wiring safer and more effective, which is especially important if you live with children. These newer types of electrical outlets will properly redirect electricity in the event of a short circuit, and they will safely power a range of different types of appliances while meeting certain code requirements. Continue reading if you would like to gain a better understanding of the importance of grounded outlets.


    Redirect Electricity during Short Circuits

    If you take a look around your home and notice that many of your electrical outlets have two prongs rather than three, you are not as safe as you could be from electrical malfunctions. The purpose of a grounded outlet—which has three prongs—is to send electricity to the ground in the event of a short circuit. If there is no third prong and a short circuit occurs, the electricity could be sent outwards towards you rather than safely to the ground. By grounding the electricity, your outlet will keep you safe from electrical hazards like shock and electrocution.

    Safely Power Your Appliances

    Since the importance of grounding is not the most recent concept, many appliances are created with this factor in mind. If you take a look at the end of the power cable for any given appliance, there is a good chance it will feature three prongs; the third prong on the power cable matches with the third prong on your grounded outlets. In order to plug a three-pronged electrical cable into a two-pronged ungrounded outlet, you will need an adapter.

    Meet National Electric Code Requirements

    Buildings have codes that they must follow to ensure that they are safe for use, and one code associated with electricity is the National Electric Code. In certain cases, your building may not satisfy the requirements of the code if you do not have grounded outlets. Fortunately switching to grounded outlets is safer as well as more convenient for your appliances.