Most electrical tasks should be left in the hands of licensed electricians . However, if you think you may need electrical repair near Dublin, then you might benefit from understanding more about how your home electrical wiring works. Watch this video for an introduction to one type of electrical system component called transformers.
Transformers can be seen on the ground or at the top of utility poles, and their function is to increase or decrease electrical voltage before sending electricity on to its destination. This step is important because not all voltage levels are safe for residential or commercial use.
Transformers first transform voltage to safer and more manageable levels at substations, and then again further along in the distribution system before feeding it into the wiring to your electrical outlets and appliances.
Because your landscape and security lighting help keep you, your family, and your property safe, as well as add elegance and curb appeal to your home, maintaining them should be a priority. Read on to learn a few things that your residential technician in Columbus would want you to know about keeping your outdoor lighting in top condition during the winter months.
Touch Up Your Landscaping
Over the course of a year, it’s not uncommon for wiring and cables that were once covered by landscaping to rise to the surface. To help protect these cords from wear and reduce the number of trip hazards on your property, take a walk around your yard and cover up exposed cables by burying them with landscaping materials like mulch, sod, and gravel.
Also, be sure to trim back any hedges, tree branches, or other types of growth that are growing too near to your outdoor light fixtures.
Use the Right Outlets
If you’re planning to decorate your home with holiday lighting this season, then using the right kind of outlet can be critical for both safety purposes and for maintaining your lights. To help prevent electrical fires, any outdoor lights that you use should be plugged into outlets that are protected by a ground fault circuit interrupter (GFCI).
For this reason, before you begin decorating, ensure that your outdoor outlets are all GFCI-protected by checking them for “test” and “reset” buttons. If your outdoor outlets look like normal ones, then contact an electrician about GFCI installation before you begin plugging in your holiday lights.
Clean the Light Fixtures
While any burnt-out bulbs should be replaced, of course, cleaning the surfaces of all the working bulbs that make up your outdoor lighting can help them shine with renewed vigor. Also, while you’re at it, consider brushing off dust and debris from the light fixtures, as well.
Finally, if your outdoor lighting isn’t looking as impressive as you’d like by the end of this process, then consider hiring an electrician to install a few more fixtures around your property.
Are you looking for a residential electrician in Dublin to check your home’s electrical wiring? If so, then consider working with Converse Electric, a third-generation, family-owned electrical services provider offering everything from home electrical upgrades to 24-hour emergency assistance.
When you choose us for your residential electrical needs, one of our technicians will perform a comprehensive Assurance Checklist for your home’s electrical system. Read on to get the facts about this diagnostic service.
When you call Converse Electric for help with your home’s electrical issues, we charge a standard rate of $89.95 for one of our electrical contractors to travel to your residence, evaluate the problem, and determine the best solution. This means that instead of worrying about being charged by the hour, you know from the start how much to expect to pay for a service visit.
Additionally, with your permission, the technician will use our Assurance Checklist to perform a complimentary evaluation of your electrical system.
Converse Electric’s Assurance Checklist provides our technicians with a way to offer customers a comprehensive diagnostic evaluation of their home’s entire electrical system.
While performing this assessment, the technician will inspect the following:
- Doorbell operation
- Smoke detector operation
- Ground fault circuit interrupter (GFCI) protection
- Accessible electrical outlet voltage, polarity, and grounding
- Switch operation
- C.S.S.T. bonding
- Outside electrical service riser, hubs, and entrance
- Surge protection operation
- Grounding system components
- Outdoor lighting condition
- Electrical panel breakers, wire size, and condition
When a Converse Electric technician conducts one of our complimentary evaluations of your home’s electrical system, you can look forward to receiving a full assessment of what electrical repairs, upgrades, or changes may be right for your home.
Also, the technician will refer to our Client Assurance Pricing Guide to provide you with an accurate quote for any recommended services. This, combined with the fact that we don’t charge by the hour, means that you don’t need to be concerned about unexpectedly high service bills when you choose Converse Electric.
Converse Electric has been providing quality electrical services for the Greater Columbus area since 1960, and our family-owned company offers a wide variety of commercial services ranging from electrical panel installation to data center maintenance. If you need new electrical wiring near Columbus because you’re planning a renovation of one of your school’s labs, then there are several reasons why you should entrust the electricians at Converse Electric with this job.
The team at Converse Electric is experienced in performing a broad range of electrical projects for commercial locations, including providing a variety of electrical solutions for educational institutions. Whether you need a lab renovation for an elementary school, high school, university, or other type of educational facility, we can perform the electrical installation for new additions, as well as provide electrical upgrades for outdated or damaged wiring. For these reasons, you should consider working with Converse Electric for your upcoming lab renovation project.
Among the services that your residential electrician near Columbus can offer is the proper bonding and grounding of your home’s corrugated stainless steel tubing (CSST) gas system. Having a properly bonded and grounded CSST system is important because this may reduce the risk of damage and electrical fires caused by lightning strikes.
Bonding is a practice that is typically used to reduce the risk of electrical shock for people, and in the case of a CSST system, it is used to both help prevent shock and protect the system from the dangerous electrical surges that can be caused by nearby lightning strikes. For single-family homes, a single bond connection is typically used for this purpose. In this way, a single bond connection can help reduce the risk of fire and gas leaks for your home. If you’re unsure whether your home has a CSST system or if it is properly grounded and bonded, then speak with an electrician to schedule an inspection for your home.
For many households, electricity costs account for a significant amount of their monthly bills. Considering this, it’s no surprise that some of the most common questions electrical contractors in Columbus hear from customers are about saving on energy. If you’re interested in spending less on your home’s electricity needs, then watch this video for some energy-saving tips.
First, start by switching from incandescent light bulbs to more energy-efficient CFLs or LEDs. Second, keep your thermostat set slightly higher in the summer and a little cooler in the winter. Third, only run your dishwasher or clothes washer when you have full loads of dishes and laundry to clean. Fourth, unplug your chargers when they aren’t in use. Finally, remember to turn off the lights before leaving a room or the house.
Holiday lights can add atmosphere and festiveness to your property this time of year, but there are a few important things that homeowners should know about this type of seasonal décor. Keep reading for some dos and don’ts that licensed electricians in Columbus would want you to know about holiday lighting.
Don’t Ignore Electrical Maintenance
A good time to schedule a professional inspection of your electrical system is before you plug in all your holiday lighting. For this reason, you should consider hiring an electrician to check your home’s electrical wiring before you begin hanging your lights.
Also, if you’ll be reusing lights from previous years, then it’s a smart idea to inspect them and toss out any that have signs of wear or damage.
Do Use GFCI Outlets
When hanging up holiday lighting, it’s important for any outdoor lights to be plugged into the right kind of electrical outlet. All your exterior lighting should be plugged into ground fault circuit interrupter (GFCI) outlets so that the power will be cut off in the case of a power surge or short circuit.
If your outdoor outlets do not have GFCIs, then speak with an electrician about replacing these before you start hanging holiday lights.
Don’t Use Ladders Along
To help avoid a trip to the emergency room this season, ensure that you have someone holding the base before climbing your ladder. Also, ensure that the ladder is in good condition and is on a stable, flat surface.
Finally, remember to carry your supplies in a tool belt, always keep at least one hand on the ladder, and wear close-toed, slip-resistant shoes.
Do Use the Right Lights
When choosing lights for your holiday decorating, it’s important to realize that not all are approved for use outdoors. For this reason, make sure you only use lights designed to be outside for your exterior decorating.
Also, consider using LED holiday lights, which are more energy-efficient than traditional ones. Lastly, remember that no lights, whether inside or out, should be left plugged in unattended.
If you already own a whole home generator in Columbus, then you may feel equipped to weather any storms that may come your way this winter. Having a generator is an excellent way to prepare for outages, but it’s important for you to ensure that the unit is in good condition. Read on to learn about readying your home generator for winter storms.
Read the Owner’s Manual
To help ensure that your whole home generator will be there for you when you need it, it’s essential that you understand what maintenance it requires. For this reason, if you haven’t done so already, you should read the owner’s manual that came with the unit.
Don’t make the mistake of waiting until the power goes out, your home generator isn’t working, and you’re left without heat or lighting to refer to the owner’s manual. Instead, read this documentation now, so you know how to prepare your generator for winter.
Perform Routine Maintenance
It’s not unusual for people to forget about maintaining their generator when then haven’t had to use it for some time. Unfortunately, this mistake can leave you without a working generator at the time when you need it the most.
To be ready for winter storms and other disasters that may leave you without power, you should care for your generator year-round by ensuring that its intake and exhaust valves stay clean. Also, refer to the owner’s manual to learn how much engine oil the unit needs and keep it within the recommended levels.
Schedule Professional Maintenance
Finally, maintenance should be routine for all your home’s equipment, including its backup generator. Just like with your HVAC or electrical system, maintaining your home generator will help ensure that its components are in good condition and that the unit will work properly in the case of a power outage.
To be ready for severe winter weather and other causes of power outages, schedule professional maintenance for your home generator every 1 to 2 years or after every 200 hours of use.
If you are seeking a team of electrical contractors that have decades of knowledge and experience under their belts, look no further than Converse Electric . For more than fifty years, our company has provided residential and commercial electric services near Columbus. We pride ourselves in providing quality electrical repair to all of our customers, and we will treat you like a part of our family.
Over the decades, our company has built up a reputation of providing reliable electrical wiring and repair at competitive prices. Our founder, Clark Converse, first started our company in 1960 and began working out of his garage. As the business grew and expanded, its commitment to customer satisfaction remained the same. By 2011, Converse Electric had expanded to serve both commercial and residential clients. Today, we are proud to be owned by a third-generation businessman who is also a skilled electrical contractor. Over the years, local newspapers and journals have written articles on the success of our family business.
Over the years, your home’s electrical outlets, wiring, and other systems will experience gradual wear and tear. To protect the safety of your family and property, be sure to call an electrician at the first sign of an emergency. With services from a residential electrician near Columbus , you will be able to receive safe and accurate electrical repair for your home. If you wait to call your electrician, you could run the risk of creating a serious safety hazard on your property. Some of the top reasons to call an emergency electrician include:
You experience frequent power interruptions.
The outlets around your property should be able to handle the voltage requirements of all of your appliances and lights. If you experience frequent power interruptions or flipped circuit breakers, this is a sign that your electrical system is not wired correctly. To avoid an electrical surge or potential fire hazard, contact an emergency electrician to deal with your power interruptions. Replacing your wiring our outlets will restore the performance and safety of your system.
You are worried about electrical shocks.
A properly functioning electrical system will protect you from electrical shock. If your outlet or circuit breaker shocks you when you get too close, this is a warning sign that your system is overloaded or improperly wired. Electrical shocks can be deadly, so you will need to hire an emergency electrician to handle the issue. Once your system has been repaired, you and your family members will be protected against sudden shocks and sparks.
Your circuit panel is wet or rusty.
Electricity and water are a deadly combination. In the event that you notice corrosion or moisture on or around the main circuit panel of your home, it is of the utmost importance that you hire an emergency electrician to deal with the issue. By replacing your circuit panel and eliminating any sources of moisture or rust, your electrician will be able to make certain that your electrical panel is not creating a fire and safety hazard in your home.
- Electrical Contractors
- Columbus Electrician
- Exterior Lighting
- LED Lighting
- Converse Electric
- Residential Electrician
- Landscape Lighting
- Residential Generators
- Conserving Energy
- Commercial Electrician
- Home Generators
- Electrical Wiring
- Wiring mistakes
- Home Appliances
- Interior Lighting
- Light Fixtures
- Common Home electrical problems
- Hot Tub Wiring
- Electrical Panel
- Emergency Electrician
- Surge Protectors
- Power Outtage
- Food Safety
- Distribution Panel
- Office Transformers