Most electrical tasks should be left in the hands of licensed electricians . However, if you think you may need electrical repair near Dublin, then you might benefit from understanding more about how your home electrical wiring works. Watch this video for an introduction to one type of electrical system component called transformers.
Transformers can be seen on the ground or at the top of utility poles, and their function is to increase or decrease electrical voltage before sending electricity on to its destination. This step is important because not all voltage levels are safe for residential or commercial use.
Transformers first transform voltage to safer and more manageable levels at substations, and then again further along in the distribution system before feeding it into the wiring to your electrical outlets and appliances.
Are you looking for a residential electrician in Dublin to check your home’s electrical wiring? If so, then consider working with Converse Electric, a third-generation, family-owned electrical services provider offering everything from home electrical upgrades to 24-hour emergency assistance.
When you choose us for your residential electrical needs, one of our technicians will perform a comprehensive Assurance Checklist for your home’s electrical system. Read on to get the facts about this diagnostic service.
When you call Converse Electric for help with your home’s electrical issues, we charge a standard rate of $89.95 for one of our electrical contractors to travel to your residence, evaluate the problem, and determine the best solution. This means that instead of worrying about being charged by the hour, you know from the start how much to expect to pay for a service visit.
Additionally, with your permission, the technician will use our Assurance Checklist to perform a complimentary evaluation of your electrical system.
Converse Electric’s Assurance Checklist provides our technicians with a way to offer customers a comprehensive diagnostic evaluation of their home’s entire electrical system.
While performing this assessment, the technician will inspect the following:
- Doorbell operation
- Smoke detector operation
- Ground fault circuit interrupter (GFCI) protection
- Accessible electrical outlet voltage, polarity, and grounding
- Switch operation
- C.S.S.T. bonding
- Outside electrical service riser, hubs, and entrance
- Surge protection operation
- Grounding system components
- Outdoor lighting condition
- Electrical panel breakers, wire size, and condition
When a Converse Electric technician conducts one of our complimentary evaluations of your home’s electrical system, you can look forward to receiving a full assessment of what electrical repairs, upgrades, or changes may be right for your home.
Also, the technician will refer to our Client Assurance Pricing Guide to provide you with an accurate quote for any recommended services. This, combined with the fact that we don’t charge by the hour, means that you don’t need to be concerned about unexpectedly high service bills when you choose Converse Electric.
Holiday lights can add atmosphere and festiveness to your property this time of year, but there are a few important things that homeowners should know about this type of seasonal décor. Keep reading for some dos and don’ts that licensed electricians in Columbus would want you to know about holiday lighting.
Don’t Ignore Electrical Maintenance
A good time to schedule a professional inspection of your electrical system is before you plug in all your holiday lighting. For this reason, you should consider hiring an electrician to check your home’s electrical wiring before you begin hanging your lights.
Also, if you’ll be reusing lights from previous years, then it’s a smart idea to inspect them and toss out any that have signs of wear or damage.
Do Use GFCI Outlets
When hanging up holiday lighting, it’s important for any outdoor lights to be plugged into the right kind of electrical outlet. All your exterior lighting should be plugged into ground fault circuit interrupter (GFCI) outlets so that the power will be cut off in the case of a power surge or short circuit.
If your outdoor outlets do not have GFCIs, then speak with an electrician about replacing these before you start hanging holiday lights.
Don’t Use Ladders Along
To help avoid a trip to the emergency room this season, ensure that you have someone holding the base before climbing your ladder. Also, ensure that the ladder is in good condition and is on a stable, flat surface.
Finally, remember to carry your supplies in a tool belt, always keep at least one hand on the ladder, and wear close-toed, slip-resistant shoes.
Do Use the Right Lights
When choosing lights for your holiday decorating, it’s important to realize that not all are approved for use outdoors. For this reason, make sure you only use lights designed to be outside for your exterior decorating.
Also, consider using LED holiday lights, which are more energy-efficient than traditional ones. Lastly, remember that no lights, whether inside or out, should be left plugged in unattended.
In today’s working world, many employees are choosing to work from home. If you are creating a new home office, you should carefully consider your lighting design options . An electrician that specializes in wiring and security lighting in Columbus can answer any questions that you may have about your office lighting design. The right lights can increase your productivity and boost your mood when you are working from home.
Your personal preferences will play an important role when choosing lights for your home office. Many homeowners prefer a combination of diffused and task lighting for their work spaces. An overhead pendant lamp can bathe your home office in a pleasing glow. Overhead recessed lighting can be directed toward your desk so that you have plenty of light when you are reviewing paperwork or working on your computer. With services from a certified electrician, you can create a custom lighting design that matches the décor and character of your home office.
Today, you won’t have a lack of options when it comes to electrical work in Columbus. The incandescent light bulb is an old standby, so electricians have been working with them for many years. Take a look at this video clip for a quick overview of the history of the incandescent light bulb.
When you think of a light bulb, there’s a good chance you picture an incandescent light bulb. The incandescent light bulb was introduced more than a century ago, but the bulbs we know today have been quite similar since about 1910. This type of light source is convenient because the bulbs are on the more affordable side, and they do a nice job in terms of color rendering. However, incandescent light bulbs are not quite as efficient as some of the alternatives that have been introduced in more recent years.
A whole home generator is a terrific addition to your household’s electrical system. If you are considering a generator installation for your property, you may have questions about the typical care and maintenance requirements that are associated with home generators. A residential electrician near Columbus can answer any questions that you may have about how to maintain your generator throughout the years and seasons.
Typically, generator maintenance is always performed by a qualified electrician. In order to keep your generator running smoothly, you will need to make sure that its engine is consistently topped off with the correct amount of oil. It is also important to schedule professional preventative maintenance services at least once every year. During your generator’s regularly scheduled maintenance, your electrician will inspect its various systems for signs of wear and tear. By keeping up with your generator’s maintenance needs, you can rest assured that your unit will be ready to power your home in the event of an electrical outage in your area.
If your circuit breaker is constantly tripping, you may want to troubleshoot your electrical system with the help of a licensed electrician serving Columbus . In this video, you will take a look at some of the most common causes of a tripped circuit breaker. Oftentimes, a circuit breaker will trip when it is overloaded with too much voltage. Loose or damaged wiring can also cause your circuit breaker to trip.
For help dealing with circuit breaker or electrical outlet issues in your home, be sure to get in touch with a residential electrician. With services from a team of qualified electrical contractors, you can identify the cause of your tripped circuit breaker. A simple electrical repair service may be all that is needed to restore your circuit breaker to proper function.
If you have experienced a weather-related power outage during the summer season, you are probably well aware of the inconvenience and discomfort that is associated with losing power for hours or even days. To protect your home against summer storms, you should talk to your electrician about the benefits of home generators . When you install a whole house generator in Columbus, your home will continue to receive power during an outage. To highlight the benefits of installing a whole home generator before the start of the summer, read on to learn about some generator essentials.
Learning About How Generators Work
When you are considering a generator installation before the summer gets into gear, it is helpful to learn about how these systems work to power your home. A generator can be powered by various fuel types, including natural gas or propane. If your generator is connected to your home’s main electrical grid, it will power your outlets, appliances, and lighting, throughout the duration of the power outage.
Choosing the Best Generator for Your Home
Once you had learned the fundamentals about how generators work, you will be ready to start shopping around for a system that meets the requirements of your household. Your generator needs to be large enough to power your desired outlets and appliances, but it should not be so large that it overloads your system. You should also make sure that you have easy access to your generator’s required fuel source.
Evaluating the Benefits of a Whole Home Generator Installation
A whole home generator can offer you many benefits during the summer season. In the event that a major storm descends on your area, you will have the peace of mind that comes from knowing that your household is protected against an outage. Your generator can also keep your refrigerator running, so you will not have to worry about spoiled food or unsanitary food storage conditions. Your electrician can help you decide whether a generator installation is right for your home.
Security lighting can provide you with an important line of defense against burglars and other criminals. When you are working with your electrician to create a custom security lighting design for your home, you will want to make sure that your lights are placed in the most effective locations. A residential electrician near Columbus can install electrical outlets and security lights in the best possible places around the exterior of your home. With your new lights in place, you will have better peace of mind during the nighttime hours. Let’s take a look at three of the most beneficial locations for your home security lighting.
If your home has a back entrance, you may want to install security lights above your door. Not only will security lights protect this vulnerable area of your home, but they will also provide safety and illumination if you choose to enter your home through the back way after dark. Ideally, the lights along your back door should be placed on a motion sensor system.
A potential burglar may be tempted to lurk in your home’s side yard. Your side yard may be particularly appealing if it is not visible from the street. When you are choosing locations for your security lights, you should definitely consider placing them along the side yard of your home. For additional safety and security, you may want to place your side yard lights on a timer, which will cause them to turn on at a certain time each evening.
Your security lights also need to illuminate any blind spots that may be located around your front or side yards. An experienced electrician can work with you to identify any areas that are not clearly visible or properly illuminated at night. Security lights may be beneficial, for example, if they are placed along your fencing or near a certain tree or shrub. After your security lights have been installed, your home will have an extra layer of defense against criminals.
A few decades ago, professional electrical contractors serving Columbus weren’t using LED lights in the same way that they are today for electrical service. Task, atmospheric, and security lighting have all relied on incandescent or fluorescent bulbs, but the tide is turning. Watch this video on how blue LEDs have impacted electrical contractors and the world.
Red and green LEDs have been around since the 1980s, so what makes blue so special as a latecomer? Once blue LEDs were developed in the 1990s, the 3 colors could be combined to make usable white light. This created countless opportunities to improve efficiency in residential and commercial areas, and it has even given promise to underdeveloped nations that don’t have access to the electricity we take for granted. LED lights can also use energy from batteries or even solar energy from panels for increased efficiency. They last exponentially longer than alternatives and continue to become more affordable.
- Electrical Contractors
- Columbus Electrician
- Exterior Lighting
- LED Lighting
- Converse Electric
- Residential Electrician
- Landscape Lighting
- Residential Generators
- Conserving Energy
- Commercial Electrician
- Home Generators
- Electrical Wiring
- Wiring mistakes
- Home Appliances
- Interior Lighting
- Light Fixtures
- Common Home electrical problems
- Hot Tub Wiring
- Electrical Panel
- Emergency Electrician
- Surge Protectors
- Power Outtage
- Food Safety
- Distribution Panel
- Office Transformers