• Holiday Lighting 101: Dos and Don’ts for Homeowners

    Holiday lights can add atmosphere and festiveness to your property this time of year, but there are a few important things that homeowners should know about this type of seasonal décor. Keep reading for some dos and don’ts that licensed electricians in Columbus would want you to know about holiday lighting.

    Don’t Ignore Electrical Maintenance

    A good time to schedule a professional inspection of your electrical system is before you plug in all your holiday lighting. For this reason, you should consider hiring an electrician to check your home’s electrical wiring before you begin hanging your lights.

    Also, if you’ll be reusing lights from previous years, then it’s a smart idea to inspect them and toss out any that have signs of wear or damage.

    Do Use GFCI Outlets

    When hanging up holiday lighting, it’s important for any outdoor lights to be plugged into the right kind of electrical outlet. All your exterior lighting should be plugged into ground fault circuit interrupter (GFCI) outlets so that the power will be cut off in the case of a power surge or short circuit.

    If your outdoor outlets do not have GFCIs, then speak with an electrician about replacing these before you start hanging holiday lights.

    Don’t Use Ladders Along

    To help avoid a trip to the emergency room this season, ensure that you have someone holding the base before climbing your ladder. Also, ensure that the ladder is in good condition and is on a stable, flat surface.

    Finally, remember to carry your supplies in a tool belt, always keep at least one hand on the ladder, and wear close-toed, slip-resistant shoes.

    Do Use the Right Lights

    When choosing lights for your holiday decorating, it’s important to realize that not all are approved for use outdoors. For this reason, make sure you only use lights designed to be outside for your exterior decorating.

    Also, consider using LED holiday lights, which are more energy-efficient than traditional ones. Lastly, remember that no lights, whether inside or out, should be left plugged in unattended.

  • Is Your Home Generator Ready for Winter Storms?

    If you already own a whole home generator in Columbus, then you may feel equipped to weather any storms that may come your way this winter. Having a generator is an excellent way to prepare for outages, but it’s important for you to ensure that the unit is in good condition. Read on to learn about readying your home generator for winter storms.

    Read the Owner’s Manual

    To help ensure that your whole home generator will be there for you when you need it, it’s essential that you understand what maintenance it requires. For this reason, if you haven’t done so already, you should read the owner’s manual that came with the unit.

    Don’t make the mistake of waiting until the power goes out, your home generator isn’t working, and you’re left without heat or lighting to refer to the owner’s manual. Instead, read this documentation now, so you know how to prepare your generator for winter.

    Perform Routine Maintenance

    It’s not unusual for people to forget about maintaining their generator when then haven’t had to use it for some time. Unfortunately, this mistake can leave you without a working generator at the time when you need it the most.

    To be ready for winter storms and other disasters that may leave you without power, you should care for your generator year-round by ensuring that its intake and exhaust valves stay clean. Also, refer to the owner’s manual to learn how much engine oil the unit needs and keep it within the recommended levels.

    Schedule Professional Maintenance

    Finally, maintenance should be routine for all your home’s equipment, including its backup generator. Just like with your HVAC or electrical system, maintaining your home generator will help ensure that its components are in good condition and that the unit will work properly in the case of a power outage.

    To be ready for severe winter weather and other causes of power outages, schedule professional maintenance for your home generator every 1 to 2 years or after every 200 hours of use.

  • Converse Electric: A History of Providing Excellent Service

    If you are seeking a team of electrical contractors that have decades of knowledge and experience under their belts, look no further than Converse Electric . For more than fifty years, our company has provided residential and commercial electric services near Columbus. We pride ourselves in providing quality electrical repair to all of our customers, and we will treat you like a part of our family.

    Over the decades, our company has built up a reputation of providing reliable electrical wiring and repair at competitive prices. Our founder, Clark Converse, first started our company in 1960 and began working out of his garage. As the business grew and expanded, its commitment to customer satisfaction remained the same. By 2011, Converse Electric had expanded to serve both commercial and residential clients. Today, we are proud to be owned by a third-generation businessman who is also a skilled electrical contractor. Over the years, local newspapers and journals have written articles on the success of our family business.

  • Top Reasons to Call an Emergency Electrician

    Over the years, your home’s electrical outlets, wiring, and other systems will experience gradual wear and tear. To protect the safety of your family and property, be sure to call an electrician at the first sign of an emergency. With services from a residential electrician near Columbus , you will be able to receive safe and accurate electrical repair for your home. If you wait to call your electrician, you could run the risk of creating a serious safety hazard on your property. Some of the top reasons to call an emergency electrician include:

    You experience frequent power interruptions.

    The outlets around your property should be able to handle the voltage requirements of all of your appliances and lights. If you experience frequent power interruptions or flipped circuit breakers, this is a sign that your electrical system is not wired correctly. To avoid an electrical surge or potential fire hazard, contact an emergency electrician to deal with your power interruptions. Replacing your wiring our outlets will restore the performance and safety of your system.

    You are worried about electrical shocks.

    A properly functioning electrical system will protect you from electrical shock. If your outlet or circuit breaker shocks you when you get too close, this is a warning sign that your system is overloaded or improperly wired. Electrical shocks can be deadly, so you will need to hire an emergency electrician to handle the issue. Once your system has been repaired, you and your family members will be protected against sudden shocks and sparks.

    Your circuit panel is wet or rusty.

    Electricity and water are a deadly combination. In the event that you notice corrosion or moisture on or around the main circuit panel of your home, it is of the utmost importance that you hire an emergency electrician to deal with the issue. By replacing your circuit panel and eliminating any sources of moisture or rust, your electrician will be able to make certain that your electrical panel is not creating a fire and safety hazard in your home.

  • Troubleshooting Common Generator Issues

    During a storm or power outage, home generators provide electricity on demand. If your home is equipped with a whole house generator, you will want to make sure that it is ready to kick into gear during an emergency. With services from a team of electrical contractors serving Columbus, you can perform regularly scheduled maintenance on your generator. By taking the time to repair your generator issues, you will be able to keep it up and running for many years. Let’s take a look at how to troubleshoot some of the most common issues that occur with generator systems.

    Battery Issues

    Battery issues are among the most common reasons why home generators fail to operate. In order to provide power to your home, your generator needs to be equipped with a charged and fully functional battery. To troubleshoot your battery problem, your electrician may need to open up your generator and physically inspect the battery. Oftentimes, battery failure is due to corrosion, loose connections, or other minor problems that can be easily remedied.

    Coolant Flow Problems

    Like the engine in a car, a generator requires coolant in order to operate correctly and avoid overheating. When your generator stops functioning, the problem could lie in its coolant flow system. During a generator repair appointment, your electrician may perform a coolant load test to diagnose the issue. If the load test reveals a low level of coolant in your generator’s internal systems, its thermostat or switches may be in need of repair.

    Low Oil Levels

    Low oil levels can quickly ruin the performance and reliability of a home generator system. Unlike oil leaks in cars, however, generator oil problems are often caused by a phenomenon that is known as wet stacking. If a generator operates well below its capacity for a prolonged period, its unburned fuel will wet stack and cause less oil to be pumped through its engine. Your electrician may suggest that you connect your generator to a device called a load bank, which is designed to stabilize its oil levels.

  • Comparing GFCI and AFCI Circuit Breakers

    When you hire an electrician to rewire your home , he may recommend that you install both GFCI and AFCI circuit breakers. This video explains the differences between GFCI and AFCI circuit breakers, as well as the proper use for each type of unit. GFCI circuit breakers are designed to prevent electrical shocks, whereas AFCI circuit breakers are responsible for detecting and preventing electrical fires. A residential electrician near Columbus can help to explain the differences between these breakers.

    To achieve the best safety from your electrical installation, you can install both GFCI and AFCI circuit breaker systems. With a combination of each type of unit, you will have the peace of mind that comes from knowing that your home is protected from shocks, surges, and fires.

  • Why You Might Need New Electrical Outlets

    Electrical outlets allow you to connect your home’s lights and appliances to your main electrical grid. Whether you are finding that your current number of outlets does not meet your needs, or you are looking to renovate an older home, there may be several reasons to update your home’s electrical outlets. A residential electrician near Columbus can help you safely replace the electrical outlets throughout your home.

    There are several reasons why you may be considering an electrical outlet upgrade. If your current outlets are outdated, they may not offer three prong grounding systems. Your brand new outlets will be properly grounded and ready for all of your plugs and cords. During a home renovation, your licensed electrician may recommend that you consider a new outlet installation.

    Finally, if you have started to notice that your current outlets are showing signs of becoming charred or cracked, this is an indication that they need to be replaced immediately.

  • Want to Protect Your Family? Better Lighting Might Do the Trick

    Lighting can provide safety and security to the indoor and outdoor spaces around your home. When you are working with an electrician to create a new lighting design for your property, consider choosing security lighting and other features that are specifically designed to meet the needs of your family members. A residential electrician near Columbus can provide you with detailed information about the various lighting options that are available for your property. Your lighting can provide you with various security functions, including: home - light

    Senior Fall Prevention

    If you are renovating a home for a senior family member, consider placing lights in key areas of the home. Stairwells, hallways, and other spaces can pose safety threats to elders who have mobility or vision limitations. Bright lighting can help to illuminate indoor and outdoor spaces, which may help to protect your senior family members from slips and falls. An electrician can help you identify areas of your home that may pose safety threats without the correct type of lighting.

    Residential Security

    Indoor and outdoor lighting can be a key component of your home’s security system. Motion-activated lights, for example, can be set so that they will automatically turn on when a person is walking through your yard. On interior of your home, you can set up a timed lighting system that will illuminate your home when you are on vacation. A secure lighting strategy can make your home much less attractive to criminals.

    Soothing for Children with Autism

    Children with autism can be very sensitive to lighting and other forms of visual stimulation. If you are the parent of a child with autism, consider protecting your son or daughter with sensory mood lighting. Lights that can be dimmed or tinted may provide a calming and soothing sensation. You can place sensory lighting throughout your entire home, or include special lighting in a child’s bedroom and play areas. The calming effect of your sensory lighting installation may prove to have many benefits for your child.

  • Are Power Surges Killing Your Expensive Possessions?

    A power surge can send a wave of current through the electrical outlets in your home. Without proper surge projection, you may find that your home needs significant electric repairs following a power surge. With services from a residential electrician near Columbus , you will be able to protect your electrical outlets and appliances from the dangers of power surges. One of the major dangers of an electrical surge is that high amounts of current can destroy the electronic components of computers, televisions, and home appliances. Let’s take a look at some signs that your expensive possessions could be at risk of being damaged by a surge. electrical - surge

    You don’t use surge protectors.

    In order to protect appliances, such as computers and televisions, from the dangers of power surges, you will need to place surge protectors on all of your outlets. Since not all surge protectors offer the same level of performance, be sure to choose products that are specifically designed to be paired with electronic devices. Your electrician can help you find and install surge protectors that are specifically designed to protect your appliances.

    You have smart appliances throughout your home.

    As today’s technology has advanced, our appliances have evolved to include electronic components and delicate circuitry. If you have a smart fridge or other digital device in your kitchen, for instance, your appliances could become seriously damaged during an electrical surge. After you invest in brand new appliances for your kitchen or family room, make sure that they are surge protected.

    Your electrical system does not have surge suppression equipment.

    While individual surge protectors can help to protect individual outlets from damaged, a whole-house surge suppression system will prevent electrical surges from entering through your main circuitry. To achieve total peace of mind that your expensive appliances are protected from dangerous surges, ask your electrician to install a surge suppressor in your ground wiring. In the event of an electrical surge, the suppression equipment will keep the electrical current from entering the wiring in your house.

  • How Do Electricians Install Whole House Generators?

    If you want to protect your home from unexpected power outages, consider installing a whole house generator . In this video from This Old House, you will learn about how electricians install home generators. To protect the home from electrical dangers, the generator must be installed five feet from any combustible materials. A team of electrical contractors serving Columbus can help you install the perfect generator for the needs of your household.

    Rather than calling an emergency electrician the next time that your power goes out, consider planning ahead with a generator installation. Today’s home generators have enough power capacity to send electricity to all of the various appliances, outlets, and light fixtures in your home.